IR2304PBF
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IR2304PBF |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 620V |
| Max Output Current | 130mA |
| Power Supplies | 15V |
| Power Dissipation | 1W |
| Output Current | 130mA |
| Propagation Delay | 330 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 300ns |
| Fall Time (Typ) | 170 ns |
| Turn-Off Delay Time | 220 ns |
| Rise / Fall Time (Typ) | 200ns 100ns |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 0.13A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 60mA 130mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.3V |
| Turn Off Time | 0.33 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.9276mm |
| Length | 10.8966mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR2304PBF Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.There is a package in the form of Tube.Ideally, it should be mounted in the direction of Through Hole.In the absence of a 10V~20V supply voltage, it can demonstrate its superiority.This device is designed with a IGBT, N-Channel MOSFET gate type.There is a temperature range for this device of -40°C~150°C TJ.The input type for this program is Non-Inverting.Its configuration is based on a total of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IR2304PBF.Mosfet driver is mounted using Through Hole.A total of 8 pins are available on the device.The device is specifically designed to operate at 15V volts.130mA is the maximum output current.There are several useful electronic components within its subcategory MOSFET Drivers.Maximum (Bootstrap) voltage can be up to 600V.The basis of this system consists of 2 outputs.Mosfet gate drivers supports a current output of 130mA.This device has a maximum power dissipation of 1W, indicating that it is capable of reducing power loss without overheating.The power supply of 15V is able to solve the power supply problems for a wide variety of applications.In this case, the voltage is 620V.
IR2304PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IR2304PBF Applications
There are a lot of Infineon Technologies IR2304PBF gate drivers applications.
- Automotive Applications
- General Purpose 3-Phase Inverter
- 3-Phase Motor Inverter Driver
- High current laser/LED systems
- Telecom switch mode power supplies
- PCMCIA applications
- Isolated Supplies for controller area network (CAN),
- Industrial Power Supplies
- Portable Navigation Devices
- AC-DC Inverters