IR2117PBF
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IR2117PBF |
| Number of Outputs | 1 |
| Output Voltage | 20V |
| Max Output Current | 500mA |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 340μA |
| Power Dissipation | 625mW |
| Output Current | 250mA |
| Max Supply Current | 340μA |
| Propagation Delay | 200 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 ps |
| Max Output Voltage | 20V |
| Reference Voltage | 600V |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 105 ns |
| Min Output Voltage | 10V |
| Rise / Fall Time (Typ) | 80ns 40ns |
| Channel Type | Single |
| Turn On Time | 0.2 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 250mA 500mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead, Lead Free |
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Integrated Circuit (IC) |
IR2117PBF Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.Gate drivers is package in Tube case.There is a mounting bracket in the way of Through Hole.When the supply voltage is 10V~20V it is able to demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET is used in its design.There is a temperature range for this device of -40°C~150°C TJ.Non-Inverting is used as its input type.Initially, the configuration is composed of 8 terminations.There are numerous related parts listed under its base part number IR2117PBF.You mount it with Surface Mount, Through Hole.A total of 8 pins are available on the device.Specification is for 15V supply voltage operation.In the maximum case, the output current can be 500mA volts.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.Mosfet driver has been integrated wMosfet driverh a total of 1 outputs for Mosfet drivers basis.An output current of 250mA is supported.This device has a maximum power dissipation of 625mW, indicating that it is capable of reducing power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 340μA to ensure greater stabilMosfet gate driversy.Mosfet gate drivers outputs 20V as voltage.A voltage of 15V should be set for the operating supply voltage.Mosfet driver ic is recommended that the maximum output voltage remain at 20V.
IR2117PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
Maximum power dissipation of 625mW
IR2117PBF Applications
There are a lot of Infineon Technologies IR2117PBF gate drivers applications.
- Isolated Gate Driver Supplies
- Head-up and Head mounted displays
- Isolated Supplies for Motor Control
- High power buffers
- Automotive Applications
- Dual-Battery Systems
- DC/DC converters
- Digitally controlled power supplies
- Commercial air-conditioning (CAC)
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,