IR2113STRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.25W |
| Technology | CMOS |
| Voltage - Supply | 3.3V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IR2113SPBF |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Max Output Current | 2.5mA |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 340μA |
| Power Dissipation | 1.25W |
| Output Current | 2.5A |
| Max Supply Current | 340μA |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ns |
| Max Output Voltage | 20V |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 20 ns |
| Min Output Voltage | 10V |
| Rise / Fall Time (Typ) | 25ns 17ns |
| Channel Type | Independent |
| Turn On Time | 0.15 μs |
| Output Peak Current Limit-Nom | 2.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 2.35mm |
| Length | 10.4902mm |
| Width | 7.5946mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead, Lead Free |
IR2113STRPBF Overview
The 16-SOIC (0.295, 7.50mm Width) package offers greater flexibility.A package of Tape & Reel (TR) has been used.Surface Mount is the way in which it is mounted.In the absence of a power supply voltage of 3.3V~20V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel MOSFET.This device can operate at temperatures up to -40°C~150°C TJ.Non-Inverting is used as the input type.As a result of its configuration, it contains a maximum of 16 terminations.You will find various related parts under the base part number IR2113SPBF.In this case, Surface Mount indicates how the device is to be mounted.A total of 16 pins are available on the device.A voltage of 15V is required for its operation.There is an output current limit of 2.5mA for this device.There are several useful electronic components in this subcategory of MOSFET Drivers.Ideally, the high-side voltage should not exceed 600V.The basis of this system consists of 2 outputs.Mosfet gate drivers supports a current output of 2.5A.Its maximum power dissipation of 1.25W also demonstrates its maximum ability to transfer power without overheating.To maintain higher stability, the supply current should always be 340μA.The voltage it outputs is 20V.Mosfet gate drivers is recommended that you set the operating supply voltage to 15V.A maximum voltage of 20V should be maintained for the output voltage.
IR2113STRPBF Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.25W
IR2113STRPBF Applications
There are a lot of Infineon Technologies IR2113STRPBF gate drivers applications.
- AC-DC Inverters
- A/D drivers
- Industrial Motor Inverter - Power Tools, Robotics
- High power buffers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High current laser/LED systems
- General Purpose 3-Phase Inverter
- Commercial and agricultural vehicles (CAV)
- Telecom switch mode power supplies
- Automotive Applications