IR20153SPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -55°C |
| Voltage - Supply | 5V~20V |
| Base Part Number | IR20153SPBF |
| Number of Outputs | 1 |
| Output Voltage | 170V |
| Max Output Current | 1.5A |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 5V |
| Output Current | 1.5A |
| Propagation Delay | 2 μs |
| Input Type | Inverting |
| Turn On Delay Time | 1 ns |
| Max Output Voltage | 20V |
| Rise Time | 400ns |
| Fall Time (Typ) | 400 ns |
| Turn-Off Delay Time | 300 ps |
| Min Output Voltage | 5V |
| Rise / Fall Time (Typ) | 200ns 100ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | High-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| Logic Voltage - VIL, VIH | 1.4V 3V |
| High Side Voltage - Max (Bootstrap) | 150V |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
IR20153SPBF Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A packaging method of Tube is indicated.The configuration is supported by 1 drivers.Gate drivers is mounted in the way of Surface Mount.In the absence of a 5V~20V supply voltage, it can demonstrate its superiority.This device is designed with a N-Channel MOSFET gate type.Temperature range -55°C~150°C TJ is allowed for this device.Inverting is used as the input type in this program.The base part number IR20153SPBF refers to a number of related parts.Surface Mount is the way it takes to mount the device.In the device, there are 8 pins.Mosfet driver is possible to achieve a maximum output current of 1.5A.A high-side voltage can be set up to 150V (Bootstrap).Mosfet driver is based on a basis of 1 outputs that have been integrated.Mosfet gate drivers can deliver a current of 1.5A.There is a maximum value of 150°C for the allowable operating temperature.Operating temperatures must not exceed -55°C.When the supply voltage is 20V, it is at its maximum operation.A minimum supply voltage of 5V is required for operation.As a result, a voltage of 170V is produced.Mosfet driver ic is recommended that the maximum output voltage be kept at 20V.
IR20153SPBF Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 150V
IR20153SPBF Applications
There are a lot of Infineon Technologies IR20153SPBF gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Commercial and agricultural vehicles (CAV)
- Isolated Gate Driver Supplies
- Topologies
- Video amplifiers
- Pulse transformer drivers
- High frequency line drivers
- Automotive Applications
- PCMCIA applications
- High-speed communications