IR2010SPBF
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.25W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | IR2010SPBF |
| Number of Outputs | 2 |
| Output Voltage | 20V |
| Max Output Current | 3A |
| Power Supplies | 15V |
| Nominal Supply Current | 230μA |
| Power Dissipation | 1.25W |
| Output Current | 3A |
| Max Supply Current | 230μA |
| Propagation Delay | 135 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 ns |
| Rise Time | 20ns |
| Fall Time (Typ) | 25 ns |
| Turn-Off Delay Time | 15 ns |
| Rise / Fall Time (Typ) | 10ns 15ns |
| Channel Type | Independent |
| Turn On Time | 0.135 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Turn Off Time | 0.105 μs |
| High Side Voltage - Max (Bootstrap) | 200V |
| Height | 2.35mm |
| Length | 10.4902mm |
| Width | 7.5946mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR2010SPBF Overview
In order to increase flexibility, the package 16-SOIC (0.295, 7.50mm Width) is used.There is a package in the form of Tube.The device is mounted in the direction of Surface Mount.A supply voltage of 10V~20V demonstrates its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel MOSFET.Temperature range -40°C~150°C TJ is allowed for this device.Non-Inverting is used as the input type.There are 16 terminations to form the base of its configuration.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IR2010SPBF.In this case, Surface Mount indicates how the device is to be mounted.The pins are configured with 16 when designing the chip.Mosfet driver is designed specifically to run on 15V volts of power.3A is the maximum output current.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.Max (Bootstrap) can be as high as 200V.Based on its basis, it integrates 2 outputs.The output current can be set to 3A.Based on the maximum power dissipation of 1.25W, it is clear that it is capable of transferring and conducting power losses without becoming overheated.To maintain higher stability, the supply current should always be 230μA.The power supply 15V of the product solves the power supply problem for a variety of applications.In this case, it produces a voltage of 20V.
IR2010SPBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 200V
Maximum power dissipation of 1.25W
IR2010SPBF Applications
There are a lot of Infineon Technologies IR2010SPBF gate drivers applications.
- General Purpose 3-Phase Inverter
- RGB applications
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Refrigerator
- UPS systems
- Motor Drives
- serial peripheral interface (SPI), I2C
- Dual-Battery Systems
- Motor controllers
- High power buffers