INA285AQDGKRQ1
| Parameters | |
|---|---|
| Voltage Gain-Nom | 1000 |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | INA285 |
| Function | Current Monitor |
| Voltage - Input | -14V~80V |
| Accuracy | ±0.4% |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 140 dB |
| Unity Gain BW-Nom | 2 kHz |
| Sensing Method | High/Low-Side |
| Input Offset Voltage-Max | 70μV |
| Common-mode Reject Ratio-Min | 120 dB |
INA285AQDGKRQ1 Overview
In package Tape & Reel (TR), buck boost converter is included.8-TSSOP (0.173, 4.40mm Width) is the way in which voltage regulator is packaged.Surface Mount is used to mount this current regulator on the board.There should be no temperature above -40°C~125°C at the time of operation.The input voltage of -14V~80V can be supported by this voltage regulator.The 8 termination is a method for terminating a transmission line by connecting a voltage regulator that matches its characteristic impedance, which is the method of terminating a transmission line with a voltage regulator.Current regulator belongs to INA285 family.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. Using Surface Mount as a mounting system, this current regulator is mounted.The constant current should work as long as it is powered by a 5VV power source, and therefore must be plugged into a 5VV outlet.In order to include these current regulations, there is a part called Operational Amplifier that includes them.This type of FPGA is found in the Automotive, AEC-Q100 series.This electrical buck boost converter has a OPERATIONAL AMPLIFIER amplifier type.
INA285AQDGKRQ1 Features
Tape & Reel (TR) package
INA285 family
Automotive, AEC-Q100 series
INA285AQDGKRQ1 Applications
There are a lot of Texas Instruments INA285AQDGKRQ1 Current Regulation/Managements applications.
- Power management
- Smart battery packs
- Industrial applications current measurement
- Over current monitor
- Vehicle dynamic controls
- DC motor control
- Diesel injection controls
- Level translating
- Power supply current measurement
- Automotive current measurement