INA283AID
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | Zero-Drift |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 6kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA283 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 900μA |
| Voltage - Input | -14V~80V |
| Max Supply Current | 900μA |
| Accuracy | ±0.4% |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 120 dB |
| Input Offset Voltage (Vos) | 70μV |
| Bandwidth | 10 kHz |
| Voltage Gain | 46.02dB |
| Power Supply Rejection Ratio (PSRR) | 110.46dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 25μA |
| Voltage Gain-Nom | 200 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA283AID Overview
The package includes buck boost converter in version Tube.8-SOIC (0.154, 3.90mm Width) is the way in which voltage regulator is packaged.A mounting hole is provided for Surface Mount to mount this current regulator.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.The input voltage of -14V~80V is supported as an input voltage.In addition to the 8 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.Current regulator belongs to INA283 family.8-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.It is mounted by Surface Mount on this current regulator.As a result, it allows 18V to be supplied with its maximum voltage.As a result, these current regulations are included in a part called Operational Amplifier, which consists of these current regulations.With the minimum supply voltage of 2.7V, it is able to operate.There are FPGAs of this type in the Zero-Drift series.The amplifier type of this electrical buck boost converter is OPERATIONAL AMPLIFIER, which means that it is an amplifier.900μA is the operating supply current provided for its operation.Current regulation consists of 1 elements.As 900μA has a maximal supply current, its current regulator's design flexibility is maximi900μAed.Current regulations have 46.02dB voltage gains, which are the ratio of output voltage to input voltage.The resistance of the electrical dc to dc converter is 6kOhm (Ω).
INA283AID Features
Tube package
INA283 family
The maximal supply voltage of 18V
Zero-Drift series
1 elements
INA283AID Applications
There are a lot of Texas Instruments INA283AID Current Regulation/Managements applications.
- Current sensing
- Power management
- Automotive current measurement
- DC motor control
- Programmable current source
- Transmission controls
- Battery management
- Battery chargers
- Engine management
- Over current monitor