INA271SKGD1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Package / Case | Die |
| Surface Mount | YES |
| Operating Temperature | -55°C~210°C |
| Packaging | Bulk |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | UPPER |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | INA271 |
| JESD-30 Code | R-XUUC-N8 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 950μA |
| Accuracy | ±4.6% |
| Slew Rate | 1 V/us |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 130 kHz |
| Unity Gain BW-Nom | 130 kHz |
| Voltage Gain | 26.02dB |
| Average Bias Current-Max (IIB) | 25μA |
| Sensing Method | High-Side |
| Voltage Gain-Nom | 20 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
INA271SKGD1 Overview
There is an inclusion of buck boost converter in the package Bulk.A package in the way of Die is used for voltage regulator.As a rule of thumb, the operating temperature should not exceed -55°C~210°C.There is a support for voltages of -16V~80V as input voltages for this voltage regulator.In addition to the 8 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.There is a INA271 family member who is related to current regulator.In computers and other communications constant current regulators, 0 pins are pronged contacts that form part of a signal interface.If a 5VV power source is used as a power source to power the constant current, it should be able to function.There is a strong/weak growth in the number of channels: 1.As long as 18V is supplied with the maximal voltage, the buck boost converter will work.In this case, these current regulations are included as part of a part called Operational Amplifier.As long as the supply voltage is lower than 2.7V, it will operate correctly.It has an Amplifier type of OPERATIONAL AMPLIFIER.In this case, current regulation consists of 3 elements.In a current regulation, 26.02dB voltage gains are the simple ratio between the output voltage and the input voltage.
INA271SKGD1 Features
Bulk package
INA271 family
The maximal supply voltage of 18V
3 elements
INA271SKGD1 Applications
There are a lot of Texas Instruments INA271SKGD1 Current Regulation/Managements applications.
- Over-current measurement
- DC motor control
- Transmission controls
- Over-current protection
- Battery management
- Over current monitor
- Engine management
- Diesel injection controls
- Vehicle dynamic controls
- Battery chargers