INA271AIDRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Pin Count | 8 |
| Number of Elements | 3 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 950μA |
| Accuracy | 1 % |
| Slew Rate | 1 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 16μA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 130 kHz |
| Voltage Gain | 26.02dB |
| Power Supply Rejection Ratio (PSRR) | 106.02dB |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
INA271AIDRG4 Overview
Buck boost converter is embedded in the Tape and Reel package.SOIC has packaged voltage regulator in this manner.8 terminations are treated as terminations of transmission lines that use a voltage regulator with the characteristic impedance of the line as the means to terminate the transmission line.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. The current regulator is mounted on the Surface Mount axis.Channels are becoming stronger/weaker based on the following statistics: 1.As long as 18V is supplied with the maximum voltage, it is supported.There is a part called Operational Amplifier which contains all of these current regulations.It operates with the minimal supply voltage of 2.7V.This electrical buck boost converter uses a OPERATIONAL AMPLIFIER amplifier type.In this case, current regulation consists of 3 elements.In current regulations, 26.02dB voltage gains can be seen as a simple ratio of the output voltage to the input voltage.In order to ensure its reliability, it operates at a maximum temperature of 125°C.In order to operate the boost controller, it should be kept at a temperature greater than -40°C.
INA271AIDRG4 Features
Tape and Reel package
The maximal supply voltage of 18V
3 elements
The maximal operating temperature of 125°C to ensure its reliability.
INA271AIDRG4 Applications
There are a lot of Texas Instruments INA271AIDRG4 Current Regulation/Managements applications.
- Battery chargers
- DC motor control
- Transmission controls
- Programmable current source
- Suspension controls
- Diesel injection controls
- Over-current protection
- Over current monitor
- Over-current measurement
- Motor controls