INA209AIPWG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | INA209 |
| Function | Current Monitor |
| Output Type | OPEN-COLLECTOR |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Voltage - Input | 0V~26V |
| Nominal Supply Current | 1mA |
| Accuracy | ±1% |
| Amplifier Type | COMPARATOR |
| Sensing Method | High-Side |
| Input Offset Voltage-Max | 200μV |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA209AIPWG4 Overview
There is an inclusion of buck boost converter in the package Tube.In this case, voltage regulator has been packaged in the same way as 16-TSSOP (0.173, 4.40mm Width).There is a Surface Mount mounted on this current regulator.Temperatures should not exceed -25°C~85°C during operation.Current regulator is possible to use a voltage input of 0V~26V for the input.In addition to the 16 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.As part of the INA209 family, current regulator belongs to this class.As part of a signal interface in a computer or other communication constant current regulator, 16 pins are pronged contacts.Using Surface Mount as a mounting system, this current regulator is mounted.The constant current should work as long as it is powered by a 3.3VV power source, and therefore must be plugged into a 3.3VV outlet.There is a strong/weak growth in the number of channels: 1.As a result, it allows 5.5V to be supplied with its maximum voltage.Part Comparator consists of these current regulations as well as other current regulations.The buck boost converter operates with a minimum supply voltage of 3V.This electrical buck boost converter has a COMPARATOR amplifier type.
INA209AIPWG4 Features
Tube package
INA209 family
The maximal supply voltage of 5.5V
INA209AIPWG4 Applications
There are a lot of Texas Instruments INA209AIPWG4 Current Regulation/Managements applications.
- Power supply current measurement
- Power management
- Transmission controls
- DC motor control
- Diesel injection controls
- Over-current protection
- Battery management
- Suspension controls
- Over-current measurement
- Vehicle dynamic controls