INA206AIDRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Base Part Number | INA206 |
| Function | Current Monitor |
| Output Type | OPEN-DRAIN |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Voltage - Input | -16V~80V |
| Nominal Supply Current | 2.8mA |
| Current - Output | 1mA |
| Accuracy | ±3.5% |
| Response Time | 1300 ns |
| Slew Rate | 1 V/μs |
| Amplifier Type | COMPARATOR |
| Bandwidth | 500 kHz |
| Average Bias Current-Max (IIB) | 16μA |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Sensing Method | High-Side |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA206AIDRG4 Overview
There is a package called Tape & Reel (TR) that contains buck boost converter.14-SOIC (0.154, 3.90mm Width) is the way in which voltage regulator is packaged.There is a Surface Mount mounted on this current regulator.The operating temperature should not exceed -40°C~125°C.Current regulator supports the input voltage of -16V~80V.In the case of 14 terminations, which are the practice of terminating a transmission line with a voltage regulator that has the same characteristic impedance as the line itself, they are fairly common.This is a member of the INA206 family.In computers and other communications constant current regulators, 14 pins are pronged contacts that form part of a signal interface.This current regulator is mounted by Surface Mount.The supply voltage of this electrical constant current is 12V.The output current of 1mA makes it a very flexible power converter when it comes to design.In terms of channel number, I would say that it is growing strongly/weakly: 2.There is a maximum voltage to be supplied to 18V by it.As a result, these current regulations are included in a part called Operational Amplifier, which consists of these current regulations.As a result, it operates at the minimal supply voltage of 2.7V.The Amplifier type of this electrical buck boost converter is COMPARATOR.
INA206AIDRG4 Features
Tape & Reel (TR) package
INA206 family
The maximal supply voltage of 18V
INA206AIDRG4 Applications
There are a lot of Texas Instruments INA206AIDRG4 Current Regulation/Managements applications.
- Battery chargers
- DC-to-dc converters
- Over current monitor
- DC motor control
- Battery management
- Motor controls
- Automotive current measurement
- Power management
- Smart battery packs
- Industrial applications current measurement