INA199B3DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Zero-Drift |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | INA199 |
| Function | Current Sense |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 26V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 65μA |
| Voltage - Input | -0.1V~26V |
| Adjustable Threshold | NO |
| Accuracy | ±1.5% |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 100 dB |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 14 kHz |
| Supply Current-Max (Isup) | 5mA |
| Voltage Gain | 46.02dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Sensing Method | High/Low-Side |
| Input Bias Current | 28μA |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA199B3DCKT Overview
Included in package Tape & Reel (TR) is this file.A package in the way of 6-TSSOP, SC-88, SOT-363 is used for voltage regulator.In this case, Surface Mount holds the current regulator in place.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.There is a support for voltages of -0.1V~26V as input voltages for this voltage regulator.In addition to the 6 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.As part of the INA199 family, current regulator belongs to this class.6-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.In this example, the current regulator has been mounted using Surface Mount.Providing the constant current is powered by a 5VV power source, the constant current should be able to function.POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this power converter employs.There is an increase/decrease in the number of channels: 1.There is a maximum voltage to be supplied to 26V by it.As long as the supply voltage is lower than 2.5V, it will operate correctly.These FPGAs belong to the Zero-Drift series.65μA represents the operating supply current supplied for its operation.It reaches 5mA when the maximum supply current (Isup) is supplied to it for current regulation's operation.Current regulation consists of 1 elements.There are 46.02dB voltage gains, which are?the simple ratio of the output voltage to the input voltage of a current regulation.
INA199B3DCKT Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
Zero-Drift series
1 elements
INA199B3DCKT Applications
There are a lot of Texas Instruments INA199B3DCKT Current Regulation/Managements applications.
- Transmission controls
- DC motor control
- Smart battery packs
- Over-current measurement
- Vehicle dynamic controls
- Battery management
- Diesel injection controls
- DC-to-dc converters
- Battery chargers
- Programmable current source