INA170EA/2K5G4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | VSSOP |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Elements | 2 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 125μA |
| Accuracy | 2 % |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 10μA |
| Bandwidth | 400 kHz |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
INA170EA/2K5G4 Overview
Buck boost converter is included in the package Tape and Reel.Depending on how VSSOP packages voltage regulator, voltage regulator will be packaged in the same way.A 8 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 8 termination.8-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.Surface Mount is responsible for mounting this current regulator.A significant number of channels are growing strongly/weakly: 1.A maximum supply voltage of 40V can be supported by it.The current regulations of this part are included in a part that is named Operational Amplifier.A minimum supply voltage of 2.7V is required for its operation.An amplifying buck boost converter such as this one is a OPERATIONAL AMPLIFIER type amplifying buck boost converter.2 elements make up this graph.To ensure reliability, it operates at the maximum operating temperature of 85°C.The operating temperature should be greater than -40°C.In this case, the resistance of the electrical dc to dc converter is 10GOhm (Ω).
INA170EA/2K5G4 Features
Tape and Reel package
The maximal supply voltage of 40V
2 elements
The maximal operating temperature of 85°C to ensure its reliability.
INA170EA/2K5G4 Applications
There are a lot of Texas Instruments INA170EA/2K5G4 Current Regulation/Managements applications.
- Automotive current measurement
- Suspension controls
- Over-current measurement
- Current sensing
- Transmission controls
- Engine management
- DC motor control
- Diesel injection controls
- Vehicle dynamic controls
- Power management