IH5045CWE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 80Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 5nA |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switch-on Time-Max | 400ns |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
IH5045CWE Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.295, 7.50mm Width). Advanced packaging method Tube is used to provide high reliability. A switch device like this is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of 0°C~70°C TA degrees Celsius. 16 terminations have been made so far. As a result of its 2 channels, this electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. As part of its design, the 16 series is equipped with this electronic component. Circuits based on DPST - NO switching are used to construct these analog switch ics. The multiplexer consists of 2 circuits. Providing power to the analogue multiplexer requires a voltage of 4.5VV.
IH5045CWE Features
2 Channels
Switch Circuit: DPST - NO
IH5045CWE Applications
There are a lot of Rochester Electronics, LLC IH5045CWE Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Microprocessor controlled systems
- Automotive applications
- Fault Tolerant Systems
- E1 Network Equipment
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Relay replacements
- Video switching
- Communication systems
- Multiplexers