IDT72V3684L15PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAILBOX BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 66.7MHz |
| Access Time | 15 ns |
| Data Bus Width | 36b |
| Organization | 16KX36 |
| Memory Width | 36 |
| Standby Current-Max | 0.005A |
| Memory Density | 589824 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V3684L15PF Overview
The LQFP package contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .An input voltage of 3.3V results in high efficiency.As a result of this, FIFO means contains 128 terminations.These are the 128 pins for operation.A 3.3V supply voltage will ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.An operating temperature of 70°C °C is necessary for stable operation.In FIFOs , this gadget is self-contained.A BI-DIRECTIONAL FIFO memory type IC is used in the part.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 3.45V V.It consists of a total of 128 pins.This gadget can also be used to generate MAILBOX BYPASS REGISTER .The FIFO memory IC is controlled by a clock with a frequency of 66.7MHz .
IDT72V3684L15PF Features
FIFOs category
Clock frequency of 66.7MHz
IDT72V3684L15PF Applications
There are a lot of Integrated Device Technology (IDT) IDT72V3684L15PF FIFOs Memory applications.
- SPI Bus Flash Memory Devices
- Transistors
- GPS Offender Tracking
- SPI Bus Flash Memory Device
- One assembly
- Multi-stage synchronizer
- Signal processing
- High-speed disk
- Magnetic memories
- Laser Receiver System