IDT72V36106L10PF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Published | 2009 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| JESD-30 Code | R-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3.15V |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 100MHz |
| Access Time | 10 ns |
| Organization | 64KX36 |
| Memory Width | 36 |
| Standby Current-Max | 0.005A |
| Memory Density | 2359296 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
IDT72V36106L10PF Overview
You can find FIFO memory chip in package LQFP .Mounting it in Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO consists of 128 terminations, which indicates that FIFO means is empty.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget is self-contained and can be found in FIFOs .It has a type BI-DIRECTIONAL FIFO memory IC.Approximately 128 pins are attached to it.In normal circumstances, the component has 3.3V power supplies.There is a FIFO memory IC's maximum supply voltage of 3.45V .The supply voltage (Vsup) should remain above 3.15V to ensure normal operation.In this FIFO memory IC, the clock runs at frequency 100MHz .
IDT72V36106L10PF Features
FIFOs category
Clock frequency of 100MHz
IDT72V36106L10PF Applications
There are a lot of Integrated Device Technology (IDT) IDT72V36106L10PF FIFOs Memory applications.
- Multi-stage synchronizer
- Down-Hole Energy Drilling
- Consumer Systems
- Communications
- Data
- Video time base correction
- Notebook
- Communications Systems
- General Data Collection Applications at Low-Temperatures
- Industrial Systems