IDT723641L20PF
| Parameters | |
|---|---|
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX; RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| JESD-30 Code | S-PQFP-G120 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 400μA |
| Clock Frequency | 50MHz |
| Access Time | 13 ns |
| Organization | 1KX36 |
| Output Characteristics | 3-STATE |
| Memory Width | 36 |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
IDT723641L20PF Overview
You will find FIFO memory chip in the LQFP package.The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.I found that it has 120 terminations in FIFO means.In order for FIFO design to operate, FIFO design requires a maximum current of 400μA .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.It consists of a total of 120 pins.Normally, 5V power supplies are owned by the component.It is also possible to generate MAIL BOX; RETRANSMIT using this FIFO memory.A FIFO memory IC's maximum supply voltage of 5.5V is set for Vsup.The supply voltage (Vsup) should remain above 4.5V to ensure normal operation.The FIFO memory IC is controlled by a clock with a frequency of 50MHz .
IDT723641L20PF Features
FIFOs category
Clock frequency of 50MHz
IDT723641L20PF Applications
There are a lot of Integrated Device Technology (IDT) IDT723641L20PF FIFOs Memory applications.
- Queues for communication systems
- Seismic Data Collection at Extreme Temperatures
- High-speed disk
- Test Equipment
- Wireless
- Video time base correction
- PC peripheral
- Network bridges
- Controlled baseline
- General Data Collection Applications at Low-Temperatures