IDT7202LA15SOI
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX9 |
| Memory Width | 9 |
| Standby Current-Max | 0.005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.048mm |
| Length | 18.3642mm |
| Width | 8.763mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
IDT7202LA15SOI Overview
The SOIC package contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.28 terminations are contained in FIFO means.In order to operate it, it requires 80mA volts of current.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.There are a total of 28 pins on this board.It is normal for the component to own 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.The FIFO memory IC's maximum supply voltage is set to 5.5V .To ensure normal operation, the supply voltage should be greater than 4.5V (Vsup).The FIFO memory IC runs at a frequency of 40MHz .
IDT7202LA15SOI Features
FIFOs category
Clock frequency of 40MHz
IDT7202LA15SOI Applications
There are a lot of Integrated Device Technology (IDT) IDT7202LA15SOI FIFOs Memory applications.
- Measurement Equipment
- High-speed graphics pixel buffer
- Disk Controllers
- Laser Receiver System
- Industrial Systems
- Fabrication Site
- Data
- Wireless
- Medical Monitoring Device
- Emulators