ICL7642CCPD
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | ICL7642 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Power Supplies | +-1/+-8/2/16V |
| Number of Circuits | 4 |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 15μA |
| Slew Rate | 0.016V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±1V~8V |
| Input Offset Voltage (Vos) | 10mV |
| Gain Bandwidth Product | 44kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 44 kHz |
| Voltage Gain | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Length | 19.05mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ICL7642CCPD Overview
Packaging for the buffer amplifier is in the form of a 14-DIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. There is a Tube case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 14. The pins on this board total to 14 in total. Please take in mind that op amp should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. With regard to input offset voltage, instrumentation amplifier is rated at 10mV. This electronic part is recommended for mounting type Through Hole. With regard to operating temperature, op amp ranges 0°C~70°C. The buffer amplifier is capable of operating from a supply current of 10μA . Keeping the voltage gain at 90dB is the best course of action. The buffer amp consists of 4 circuits in total. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 8V voltage.
ICL7642CCPD Features
14 Pins
supply voltage of 5V
90dB voltage gain
Output Type: Rail-to-Rail
ICL7642CCPD Applications
There are a lot of Maxim Integrated ICL7642CCPD Instrumentational OP Amps applications.
- Subtraction operation circuits
- High/low-pass filter circuit
- Thermocouples
- Logarithmic operation circuits
- Tablets
- Comparator
- Portable electronic products powered by batteries
- Instrumentation
- Band-stop filter
- Gaming industry