ICL7632ECSE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | ICL7632 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1/+-8/2/16V |
| Number of Circuits | 3 |
| Operating Supply Current | 1mA |
| Supply Current-Max | 7.5mA |
| Slew Rate | 0.016V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2V~16V ±1V~8V |
| Input Offset Voltage (Vos) | 20mV |
| Gain Bandwidth Product | 1.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 44 kHz |
| Average Bias Current-Max (IIB) | 0.004μA |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=20 |
| Supply Voltage Limit-Max | 9V |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | YES |
| Neg Supply Voltage-Max (Vsup) | -9V |
| Voltage Gain-Min | 5600 |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | Non-RoHS Compliant |
ICL7632ECSE Overview
The linear amplifier is packaged in a 16-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 16. Linear amplifier has a total of 16 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Op amp rates 20mV as input offset voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . As long as the supply current of the chip does not exceed 1mA, this op amp ic can operate. This op amp contains 3 circuits. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. A voltage gain of 5600 is the minimum this op amp can achieve.
ICL7632ECSE Features
16 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
ICL7632ECSE Applications
There are a lot of Maxim Integrated ICL7632ECSE Instrumentational OP Amps applications.
- Portable docking station
- Power control
- Measurements of Wheatstone bridge
- Band-stop filter
- High gain DC amplifier
- Non-polarized electrodes
- Semiconductor detectors
- Fast A/D and D/A converters
- Precision measurement
- Radiation thermometry transducers