HMC778LP6CE
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad |
| Number of Pins | 40 |
| Weight | 117.310327mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Strip |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Subcategory | PLL or Frequency Synthesis Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.7V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 10.8GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | HMC778 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Analog IC - Other Type | PHASE LOCKED LOOP |
| Operating Supply Current | 265mA |
| Supply Current-Max (Isup) | 290mA |
| Input | Clock |
| Ratio - Input:Output | 1:1 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Height Seated (Max) | 0.9mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
HMC778LP6CE Overview
Clock ICs are packaged using the Strip method. 40-VFQFN Exposed Pad contains this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. There are a total of 40 terminations in this file. For this clock generator ic, a voltage of 3.3V is required. In this clock generator, Clock is used as the input to the clock. To access the electronic component's full performance, 1 circuits are implemented. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.7V. This clock PLL works with a supply voltage of 2.7V~5.25V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. An IC that generates clocks specifically for microprocessors, this clock PLL is 40-bits in si40e. These related electrical parts are available for the base part number HMC778. The frequency synthesizer has 40 pins that are available. This time clock generator can handle a voltage of 5V as its supply voltage. In general, this clock PLL is considered a PLL or Frequency Synthesis Circuits device. By operating at a frequency of 10.8GHz, RF synthesizer is able to reali10.8GHze high efficiency. A supply current of 265mA is required to fully operate clock PLL. ICs such as this can be classified as PHASE LOCKED LOOP-RF synthesizers since they are analog. It is recommended that the time clock generator's maximum supply current does not exceed 290mA.
HMC778LP6CE Features
Available in the 40-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 5V
HMC778LP6CE Applications
There are a lot of Analog Devices Inc. HMC778LP6CE Clock Generators applications.
- HDD recorders
- Cellular/4G
- Signal analyzer
- Automatic control
- Signal modulation and demodulation
- Test equipment
- Signal generator
- Quenching?
- Set-top boxes
- Electronic countermeasures