HIP1013CB-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Feature | Fault Timeout, Latched Fault, UVLO |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Hot Swap Controller |
| Applications | General Purpose |
| Voltage - Supply | 10.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | HIP1013 |
| Pin Count | 14 |
| JESD-30 Code | R-PDSO-G14 |
| Output Voltage | 5V |
| Input Voltage-Nom | 12V |
| Number of Channels | 2 |
| Current - Supply | 8mA |
| Input Voltage (Min) | 10.5V |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 16V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker |
| Feature Pins | CPUMP, (MODE, /PWRON1), PGOOD, /PWRON2, RILIM |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
HIP1013CB-T Overview
In the 14-SOIC (0.154, 3.90mm Width) package you will find it.Currently, there are 2 channels accessible.It's?packaged?in?the?form?of?a?Tape & Reel (TR).14 terminations are present in total.This device has a terminal position of DUAL.In total, there are 14 pins on it.This is set up in the same way as Surface Mount.Hot-swappable device is classified as a Hot Swap Controller electrical component.To ensure reliable operation, the temperature should be set to 0°C~70°C.A General Purpose application is available for the device.In Fault Timeout, Latched Fault, UVLO, it is featured.Hot-swappable device should be able to work wHot-swappable deviceh a 10.5V~16VV power source.The number HIP1013 belongs to the HIP1013 family.There are Circuit Breaker features that can be programmed.Currently, 8mA is in short supply.With a 5V output voltage, high efficiency is possible.
HIP1013CB-T Features
The terminal position of 14
Features of Fault Timeout, Latched Fault, UVLO
Programmable features of Circuit Breaker
Output voltage of 5V
HIP1013CB-T Applications
There are a lot of Renesas Electronics America Inc. HIP1013CB-T hot swap controllers applications.
- Industrial application
- Modern analog communication
- Electric vehicle
- Raid
- Current monitoring
- Board or blade insertion into live backplanes
- Loads
- Redundant-array-of-independent-disk (RAID) storage
- High power circuit board
- Industrial computers and servers