HI3-5043-5Z
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | HI-5043 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 11pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -88dB @ 100kHz |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Drain to Source Resistance | 50Ohm |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 5.33mm |
| Length | 19.17mm |
| RoHS Status | ROHS3 Compliant |
HI3-5043-5Z Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. High reliability is provided by advanced packaging method Tube. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have a ratio of 2:1. Operation at a temperature around 0°C~75°C TA. A total of 16 terminations have been recorded. By its 1 channels, the electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the electrical part body. SPDT switching circuits are used in these analog switch ics. It consists of 2 circuits. Try searching for the analog switch ic with HI-5043 if you are looking for variants. The Drain to Source resistance of this electronic component is 50Ohm.
HI3-5043-5Z Features
1 Channels
Switch Circuit: SPDT
Drain-to-Source resistance: 50Ohm
HI3-5043-5Z Applications
There are a lot of Renesas Electronics America Inc. HI3-5043-5Z Analog Switches & Multiplexers ICs applications.
- PBXs
- Voice over IP/DSL – Integrated Access Devices, Smart
- Avionics
- Remote Powered Equipment
- Microprocessor Controlled Analog Systems
- Cable PC
- Industrial
- E1 Multiplexer
- Audio signal routing
- Precision test equipment