HI-8196PCTF
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 31Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| JESD-30 Code | S-PQCC-N16 |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| On-State Resistance (Max) | 31Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 12pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 35ns, 20ns (Typ) |
| Charge Injection | -10pC |
| Switch-on Time-Max | 75ns |
| Voltage - Supply, Dual (V±) | ±3V~10V |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
HI-8196PCTF Overview
The electronic component is convenient to ship overseas because it is packed in a 16-WQFN Exposed Pad, CSP. A high level of reliability can be achieved through the use of an advanced packaging method Tube. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -55°C~125°C TA. The total number of terminations is 16. A electrical component with 1 channels is capable of high-quality output. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 16 pins. Based on SPST - NC switching circuits, these analog multiplexers work. There are 4 circuits in this multiplexer. An switch multiplexer with 31Ohm internal resistance has a value of 31Ohm. To supply the switch device, a voltage of 2.5V must be applied.
HI-8196PCTF Features
1 Channels
Switch Circuit: SPST - NC
HI-8196PCTF Applications
There are a lot of Holt Integrated Circuits Inc. HI-8196PCTF Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Digital cross connects (DSX-1)
- Channel Banks
- Cable PC
- Medical Instrumentation
- Routers
- RGB switches
- PDAs
- FTTH
- Frame Relay Equipment