HI-8196PCIF
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 31Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| JESD-30 Code | S-PQCC-N16 |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| On-State Resistance (Max) | 31Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 5nA Max |
| Channel Capacitance (CS(off), CD(off)) | 12pF 46pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 35ns, 20ns |
| Charge Injection | -10pC |
| Switch-on Time-Max | 75ns |
| Voltage - Supply, Dual (V±) | ±3V~10V |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
HI-8196PCIF Overview
As the electronic part is packed in 16-WQFN Exposed Pad, CSP, international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. When the electronic component is given a voltage of 3.3V, it should be turned on and run. There is an electrical component included in the 16 series. Multiplexers built on a SPST - NC switching circuit are built. 4 circuits are used in this analogue multiplexer. As far as internal resistance is concerned, it has 31Ohm. It requires a minimum voltage of 2.5V to supply the switch device.
HI-8196PCIF Features
1 Channels
Switch Circuit: SPST - NC
HI-8196PCIF Applications
There are a lot of Holt Integrated Circuits Inc. HI-8196PCIF Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- SONET
- Microprocessor controlled systems
- Fiber In The Loop (FITL)
- Cell phones
- Optical Applications
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Digital cross connects (DSX-1)
- Video signal routing
- Modems