HI-8195PCTF
| Parameters | |
|---|---|
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 31Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| JESD-30 Code | S-PQCC-N16 |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| On-State Resistance (Max) | 31Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 12pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 35ns, 20ns (Typ) |
| Charge Injection | -10pC |
| Switch-on Time-Max | 75ns |
| Voltage - Supply, Dual (V±) | ±3V~10V |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
HI-8195PCTF Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-WQFN Exposed Pad, CSP. This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -55°C~125°C TA extended. In total, there have been 16 terminations. This electronic part offers high-quality output due to its 1 channels. An 3.3V voltage supply should allow the electrical part to be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. On the other hand, analog switches can be constructed using SPST - NO switching circuits. There are 4 circuits in this switch device. In this multiplexer, the internal resistance is 31Ohm. Providing power to the analogue multiplexer requires a voltage of 2.5VV.
HI-8195PCTF Features
1 Channels
Switch Circuit: SPST - NO
HI-8195PCTF Applications
There are a lot of Holt Integrated Circuits Inc. HI-8195PCTF Analog Switches & Multiplexers ICs applications.
- Data switching
- Digital Cross-Connects
- Audio/video switches
- Battery Powered Instruments
- RGB switches
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Imaging
- SONET/SDH ADM
- Precision test equipment
- Access Concentrators