HI-8195PCIF
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 31Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Power Dissipation | 1.702W |
| Number of Inputs | 4 |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 31Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 5nA Max |
| Channel Capacitance (CS(off), CD(off)) | 12pF 46pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 35ns, 20ns |
| Charge Injection | -10pC |
| Switch-on Time-Max | 75ns |
| Voltage - Supply, Dual (V±) | ±3V~10V |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
HI-8195PCIF Overview
Shipping overseas is convenient with the electronic component packed in 16-WQFN Exposed Pad, CSP. The advanced packaging method Tube provides high reliability. In Surface Mount, you'll find this switch device. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 1 channels. Turning on and running the electrical part should be easy with a 3.3V voltage supply. A total of 16 pins are injected into the electrical part body. Based on SPST - NO switching circuits, these analog multiplexers work. The internal resistance of this digital multiplexer is 31Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. It is possible to operate 4 inputs. To power the multiplexer ics, the voltage must be set at 2.5V.
HI-8195PCIF Features
1 Channels
Switch Circuit: SPST - NO
HI-8195PCIF Applications
There are a lot of Holt Integrated Circuits Inc. HI-8195PCIF Analog Switches & Multiplexers ICs applications.
- Remote Powered Equipment
- Audio signal routing
- Digital cross connects (DSX-1)
- Cable Modem
- PDAs
- Communication systems
- Imaging
- Microwave transmission systems
- Automatic test equipment
- Frame Relay Equipment