HEF40373BP,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1998 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 40373 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Output Characteristics | 3-STATE |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Independent Circuits | 1 |
| Delay Time - Propagation | 40ns |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
HEF40373BP,652 Overview
In the package 20-DIP (0.300, 7.62mm), it can be found. The package is in the form of Tube. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. This electronic part is mounted in the way of Through Hole. It operates at a voltage of 3V~15V. There is -40°C~85°C operating temperature. The 4000B series is associated with this FPGA. The electronic part in this image has 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family 40373 includes it. A 5V voltage supply is required for operation. The 20 pind are equipped with it. This device has 2 ports on board, which are all available at the same time. It is recommended to have a higher supply voltage (Vsup) than 3V.
HEF40373BP,652 Features
20-DIP (0.300, 7.62mm) package
4000B series
8 Bits
40373 family
20 pin count
HEF40373BP,652 Applications
There are a lot of NXP USA Inc. HEF40373BP,652 Latches applications.
- Flip-flops
- Automatic test equipment
- Parallel Input
- Hammer
- OC-48 communication systems
- Ring counter
- Parallel data synchronization
- Multistage ripple counting
- Counting
- Programmable binary