HEF4013BT,652
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Output Current | 2.4mA |
| Clock Frequency | 40MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 3.4mA 3.4mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 60ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7.5pF |
| fmax-Min | 7 MHz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
HEF4013BT,652 Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). As part of the package Tube, it is embedded. It is configured with Differentialas an output. There is a trigger configured with Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 3V~15V. It is operating at a temperature of -40°C~125°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 4000Bseries of FPGAs. It should not exceed 40MHzin its output frequency. In total, it contains 2 elements. It consumes 4μA of quiescent A total of 14 terminations have been made. D latch belongs to the 4013 family. It is powered by a voltage of 5V . There is 7.5pF input capacitance for this T flip flop. Basically, it is designed with a set of 14 pins. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 3V. With a current output of 2.4mA , it offers maximum design flexibility.
HEF4013BT,652 Features
Tube package
4000B series
14 pins
HEF4013BT,652 Applications
There are a lot of Nexperia USA Inc. HEF4013BT,652 Flip Flops applications.
- Frequency division
- Data storage
- Circuit Design
- Pattern generators
- Data Synchronizers
- Supports Live Insertion
- ESD protection
- Instrumentation
- Event Detectors
- High Performance Logic for test systems