HCF4541BEY

HCF4541BEY

5V Programmable Timer Programmable Timers HCF4541 14 Pins 100kHz 5V 14-DIP (0.300, 7.62mm)


  • Manufacturer: STMicroelectronics
  • Origchip NO: 761-HCF4541BEY
  • Package: 14-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 855
  • Description: 5V Programmable Timer Programmable Timers HCF4541 14 Pins 100kHz 5V 14-DIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 14-DIP (0.300, 7.62mm)
Number of Pins 14
Weight 90.718474mg
Operating Temperature -55°C~125°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
Type Programmable Timer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation 200mW
Technology CMOS
Voltage - Supply 3V~20V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 100kHz
Base Part Number HCF4541
Pin Count 14
Supply Voltage-Max (Vsup) 20V
Supply Voltage-Min (Vsup) 3V
Number of Circuits 1
Power Dissipation 200mW
Number of Bits 16
Propagation Delay 18 μs
Quiescent Current 100μA
Turn On Delay Time 18 μs
High Level Output Current -8.4mA
Low Level Output Current 8.4mA
Count Direction UP
Load/Preset Input YES
Height 1.27mm
Length 25.4mm
Width 1.27mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

HCF4541BEY Overview


In the packaging with the 14-DIP (0.300, 7.62mm), there is a programmable timer enclosed in the package. The programmable timer's frequency is set to 100kHz. It is used to pack in Tube case. Type Through Hole mounting is recommended.It is possible to supply a voltage of 3V~20V to the programmable timer.The type of chips can be divided into Programmable Timer. The operating temperature of this timer clock is -55°C~125°C. To mount this digital timer with Through Hole. It is based on HCF4541. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. The timer clock has 90.718474mg in weight. The timer clock runs quiescent current at 100μA.

HCF4541BEY Features


Operate frequency at 100kHz
Package / Case: Tube
Mounting Type:Through Hole
Quiescent Current at 100μA

HCF4541BEY Applications


There are a lot of STMicroelectronics HCF4541BEY Programmable Timers & Oscillators applications.

  • Electric Vehicles
  • Clutch Actuator circuit
  • Sensor Node
  • Motor control
  • Building Automation
  • High Vibration, High Acceleration Environments
  • Power-Gating Applications
  • Long Time One Shot
  • Delay circuits
  • Precision timing

Write a review

Note: HTML is not translated!
    Bad           Good