HAL526UA-K
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) |
| Supplier Device Package | TO-92UA-1 |
| Operating Temperature | -40°C~140°C TA |
| Packaging | Tape & Box (TB) |
| Published | 2009 |
| Series | HAL® 526 |
| Feature | Temperature Compensated |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 140°C |
| Min Operating Temperature | -40°C |
| Technology | Hall Effect |
| Voltage - Supply | 3.8V~24V |
| Function | Latch |
| Current - Supply (Max) | 5.2mA |
| Output Type | Open Drain |
| Max Output Current | 20mA |
| Polarity | South Pole |
| Polarization | South Pole |
| Current - Output (Max) | 20mA |
| Max Supply Current | 5.2mA |
| Logic Function | Latch |
| Sensing Method | Hall Effect |
| Test Condition | 25°C |
| Sensing Range | 17mT Trip, -17mT Release |
| RoHS Status | RoHS Compliant |
HAL526UA-K Overview
The magnetic switch is packaged in the Tape & Box (TB) to ensure it is protected against damage. For safety reasons, magnetic switches are packaged in TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) packages. The magnetic switches can supply a maximum current of 5.2mA for good performance. When operating, these switches can output a maximum current of 20mA. To be output, magnetic switches should be rated at a maximum current of 20mA. There is a maximum current that can be supplied by these switches of 5.2mA. It is possible to set the maximum operating temperature for magnetic switches to 140°C. For this magnetic switch to function, the operating temperature should not be lower than -40°C.
HAL526UA-K Features
Packaging: Tape & Box (TB)
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Supply Voltage: 3.8V~24V
Operating Temperature: -40°C~140°C TA
Mounting Type: Through Hole
Output Type: Open Drain
Maximum Supply Current: 5.2mA
HAL526UA-K Applications
There are a lot of TDK-Micronas GmbH HAL526UA-K Magnetic Switches applications.
- Geomagnetic field measurements
- Detection of ferromagnetic
- Reading of magnetic data storage media
- Wiper home/end position sensor
- Control of magnetic apparatus
- Motor assemblies
- Tachometers/counters
- Exercise equipment
- Robotics control
- Steering position