HAL206JQ-K
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 Short Body |
| Surface Mount | NO |
| Operating Temperature | -40°C~140°C TA |
| Packaging | Tape & Box (TB) |
| Series | HAL® |
| Feature | Temperature Compensated |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| HTS Code | 8542.39.00.01 |
| Technology | Hall Effect |
| Voltage - Supply | 3.8V~24V |
| Terminal Position | SINGLE |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| JESD-30 Code | R-PSIP-T3 |
| Function | Unipolar Switch |
| Current - Supply (Max) | 5.2mA |
| Qualification Status | Not Qualified |
| Output Type | Open Drain |
| Max Output Current | 50mA |
| Polarity | South Pole |
| Supply Voltage-Max (Vsup) | 24V |
| Supply Voltage-Min (Vsup) | 3.8V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Polarization | South Pole |
| Max Supply Current | 5.2mA |
| Sensing Method | Hall Effect |
| Test Condition | 25°C |
| Sensing Range | 16.5mT Trip, 4.2mT Release |
| Height Seated (Max) | 4.3mm |
| Length | 4.06mm |
| Width | 1.5mm |
| RoHS Status | RoHS Compliant |
HAL206JQ-K Overview
ldeally, the magnetic switch should be packaged in the Tape & Box (TB) for protection against damage. To ensure safety, the magnetic switches are packaged in TO-226-3, TO-92-3 Short Body packages. As a maximum current, the magnetic switches can supply 5.2mA. In its maximum state, these switches can output 50mA. There is a maximum current limit of 5.2mA that can be supplied by these switches. It contains 3 terminations. In a working switch, the maximum voltage should be 24V. This switch will normally supply 12V voltage for reliable operation. It is possible for this magnetic switch to supply 3.8V voltage as its minimum voltage.
HAL206JQ-K Features
Packaging: Tape & Box (TB)
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Supply Voltage: 3.8V~24V
Operating Temperature: -40°C~140°C TA
Mounting Type: Through Hole
3 Terminations
Output Type: Open Drain
Maximum Supply Current: 5.2mA
HAL206JQ-K Applications
There are a lot of TDK-Micronas GmbH HAL206JQ-K Magnetic Switches applications.
- Tachometers/counters
- Lighting actuation slave sensor
- Monitor protections of the safety gates
- Gear shift selectors and driver controls (PRNDL)
- Speed and RPM (revolutions per minute) sensing
- Magnetic encoders
- Commutation of brushless DC motors
- Dyno testing
- Compressor speed
- Clutch/brake position sensor