Parameters |
Mounting Type |
Through Hole |
Package / Case |
TO-226-3, TO-92-3 (TO-226AA) |
Supplier Device Package |
TO-92UA-6 |
Operating Temperature |
0°C~85°C TA |
Packaging |
Tape & Box (TB) |
Published |
2009 |
Series |
HAL® |
Feature |
Temperature Compensated |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
0°C |
Technology |
Hall Effect |
Voltage - Supply |
3.8V~24V |
Function |
Unipolar Switch |
Current - Supply (Max) |
5.2mA |
Output Type |
Open Drain |
Max Output Current |
50mA |
Polarity |
South Pole |
Polarization |
South Pole |
Current - Output (Max) |
50mA |
Max Supply Current |
5.2mA |
Sensing Method |
Hall Effect |
Test Condition |
25°C |
Sensing Range |
35mT Trip, 16.9mT Release |
RoHS Status |
RoHS Compliant |
HAL107JQ-C Overview
Magnetic switches are packaged in Tape & Box (TB) for protection against damage. In order to protect the switches from damage, they are packaged in TO-226-3, TO-92-3 (TO-226AA) packages. In order to be effective, magnetic switches can provide a maximum current of 5.2mA. If they are working properly, these switches can output a maximum current of 50mA. Magnetic switches should be able to output 50mA at their maximum current. There is a limit to 5.2mA current that can be supplied by these switches. The magnetic switches can operate at 85°C. However, this magnetic switch cannot function below 0°C if the operating temperature falls below that.
HAL107JQ-C Features
Packaging: Tape & Box (TB)
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Supply Voltage: 3.8V~24V
Operating Temperature: 0°C~85°C TA
Mounting Type: Through Hole
Output Type: Open Drain
Maximum Supply Current: 5.2mA
HAL107JQ-C Applications
There are a lot of TDK-Micronas GmbH HAL107JQ-C Magnetic Switches applications.
- Shafts in transmissions, hydraulic motors, pumps and gear boxes
- Medication dispensing control
- Position and limit sensing
- Electric window lift
- Encoders
- Flow-rate sensing
- Flow metering
- Industrial process control
- Spindles
- Position tracking