GAL22V10D-15LP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 83.3MHz |
| Base Part Number | GAL22V10 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 90mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 5.334mm |
| Length | 31.75mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-15LP Overview
There are 10 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a 24-DIP (0.300, 7.62mm) package containing it.There are 10 I/Os on the board.There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.An electrical supply voltage of 5V is used to power it.This part is in the family [0].Bulkshould be used to package the chip.A reliable operation is ensured by the operating temperature of [0].Ideally, the chip should be mounted by Through Hole.As part of the GAL?22V10series, it is a type of FPGA.There are 24pins on the chip.Its related parts can be found in the [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, it is mounted by Through Hole.A total of 24pins are provided on this board.It operates at a maximum supply voltage of 5.25V volts.With a minimal supply voltage of [0], it operates.A power supply of 5Vvolts is required to operate this device.This can be achieved at a frequency of 83.3MHz.There are 11 dedicated inputs used to detect the status of input signals.The device is configured with an output of [0].There are 132 product terms, which are conjunction of literals, where each literal is either a variable or its negation.
GAL22V10D-15LP Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of 0°C~75°C TA
24 pin count
24 pins
5V power supplies
10 outputs
GAL22V10D-15LP Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-15LP CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Software-Driven Hardware Configuration
- Address decoders
- Discrete logic functions
- STANDARD SERIAL INTERFACE UART
- Code converters
- ON-CHIP OSCILLATOR CIRCUIT
- Power Meter SMPS
- Field programmable gate
- INTERRUPT SYSTEM