GAL22V10D-10QP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 55mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 5.334mm |
| Length | 31.75mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-10QP Overview
There are 10 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].In this case, there are 10 I/Os programmed.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power source is powered by 5Vvolts.There is a part in the family [0].Package the chip by Bulk.The temperature at which it operates is set to 0°C~75°C TAin order to ensure its reliability.Chips should be mounted by Through Hole.As part of the GAL?22V10series, it is a type of FPGA.It is equipped with 24 pin count.The GAL22V10indicates that related parts can be found.If high efficiency is desired, the supply voltage should be kept at [0].It is mounted by Through Hole.24pins are included in its design.With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.A total of 5V power supplies are needed to run it.This can be achieved at a frequency of 125MHz.The status of input signals is detected by 11dedicated inputs.This device is configured with a 10 output.The product is equipped with 132terms.
GAL22V10D-10QP Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of 0°C~75°C TA
24 pin count
24 pins
5V power supplies
10 outputs
GAL22V10D-10QP Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-10QP CPLDs applications.
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- DMA control
- Auxiliary Power Supply Isolated and Non-isolated
- Address decoders
- STANDARD SERIAL INTERFACE UART
- Digital designs
- Digital systems
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Digital multiplexers
- Power up sequencing