GAL18V10B-15LJ
| Parameters | |
|---|---|
| Number of Dedicated Inputs | 7 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | GAL®18V10 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REGISTER PRELOAD; POWER-ON RESET |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL18V10 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 115mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
GAL18V10B-15LJ Overview
There are 10 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.A 20-LCC (J-Lead) package contains the item.In this case, there are 10 I/Os programmed.The termination of a device is set to [0].This electrical part has a terminal position of QUADand is connected to the ground.Power is supplied by a voltage of 5V volts.Package the chip by Tube.The temperature at which it operates is set to 0°C~75°C TAin order to ensure its reliability.Surface Mountshould be used for mounting the chip.In FPGA terms, it is a type of GAL?18V10series FPGA.It has 20pins programmed.This device also displays [0].According to the GAL18V10, its related parts can be found.Optimal efficiency requires a supply voltage of [0].The electronic part is mounted by Surface Mount.It is designed with 20 pins.A maximum supply voltage of 5.25Vis used in its operation.Initially, it requires a voltage of 4.75Vas the minimum supply voltage.This frequency can be achieved at 66.7MHz.Input signals are detected using 7dedicated inputs.
GAL18V10B-15LJ Features
20-LCC (J-Lead) package
10 I/Os
The operating temperature of 0°C~75°C TA
20 pin count
20 pins
GAL18V10B-15LJ Applications
There are a lot of Lattice Semiconductor Corporation GAL18V10B-15LJ CPLDs applications.
- Timing control
- Multiple Clock Source Selection
- Pattern recognition
- Power up sequencing
- Handheld digital devices
- Portable digital devices
- Preset swapping
- Power Meter SMPS
- USB Bus
- Auxiliary Power Supply Isolated and Non-isolated