FSQ500N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 496mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 25Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Power (Watts) | 6.5W |
| Max Power Dissipation | 1.42W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | FSQ500 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 6.5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 760μA |
| Nominal Supply Current | 760μA |
| Power Dissipation | 1.42W |
| Output Current | 280mA |
| Voltage - Supply (Vcc/Vdd) | 5V~10V |
| Max Supply Current | 880μA |
| Output Power | 3.5W |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 130kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 10V |
| Switcher Configuration | SINGLE |
| Max Output Power | 5.5W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature |
| Max Duty Cycle | 66 % |
| Duty Cycle | 60% |
| Output Isolation | Isolated |
| Voltage - Start Up | 6V |
| Min Breakdown Voltage | 700V |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
FSQ500N Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm) .It is available in Tube AC/DC power converter.There is a mounting point for this AC/DC converter in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~85°C TA in order to ensure its performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.When the switching frequency reaches 130kHz , the process is complete.This AC/DC converter is designed for use within the range of 5V~10V supply voltage (Vcc/Vdd).There have been 8 terminations of this program.There are 8 pins on the ac/dc converter.It are possible to mount thare ac dc converters by Through Hole .The product is acdc converter of the FPS? manufacturer family.Based on the FSQ500 family, you can search for similar acdc converters.The number of outputs to run is 1 .We have set the output current to 280mA .You can read the standard for REACH SVHC at: No SVHC .It is assumed that a coverter generates 3.5W as its output power.Approximately 880μA amps of supply current can be handled by the power AC DC.It is possible to determine the resistance of this power AC DC to be 25Ohm .The AC to DC power converter can be used with the max output power of 5.5W .
FSQ500N Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 130kHz
With 8 pins
Output Current at 280mA
Resistance : 25Ohm
FSQ500N Applications
There are a lot of ON Semiconductor FSQ500N AC DC Converters applications.
- Automotive Clusters
- Air conditioners
- Small off-line low voltage power supplies
- Appliances
- White goods
- Dimmers
- Set-top boxes
- WiFi Wireless
- Set Top Boxes (STB)
- Low-Voltage I/O System Power