FSQ211
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 851mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Published | 2015 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 18Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1.4W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 67kHz |
| Base Part Number | FSQ211 |
| Number of Outputs | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 1.4W |
| Output Current | 380mA |
| Voltage - Supply (Vcc/Vdd) | 7V~20V |
| Max Supply Current | 3mA |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Max Output Power | 3W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature |
| Max Duty Cycle | 74 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Start Up | 9V |
| Min Breakdown Voltage | 650V |
| Height | 3.3mm |
| Length | 10.15mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
FSQ211 Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .In Tube AC/DC power converter, it is available.A AC/DC converter of this type is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -25°C~85°C TA °C.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.Vcc/Vdd can be used within the range of 7V~20V supply voltage.A total of 8 terminations have been recorded.The ac/dc converter has 8 pins.It is suitable for mounting by Through Hole .A member of the FPS? manufacturer family, it has the following characteristics.Search similar acdc converters based on FSQ211 family members.A total of 1 outputs are to be processed.AC to DC converter is contained in Switching Regulator or Controllers .Current output is set to 380mA .The power AC DC is capable of high efficiency when operated at a frequency of 67kHz .In the following link, you will find the REACH SVHC standard: No SVHC .A maximum supply current of 3mA can be handled by this power AC DC.As a result, this power AC DC's resistance is 18Ohm .AC to DC power converters with a maximum output power of 3W can be used.
FSQ211 Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 380mA
Resistance : 18Ohm
FSQ211 Applications
There are a lot of ON Semiconductor FSQ211 AC DC Converters applications.
- Standby Power Supplies
- Set-top boxes
- Automotive Clusters
- Power tools fast chargers with trickle and on/off
- AC-DC Output Power Conversion Applications
- Battery Chargers
- Universal Off-Line Power Supplies
- Standby Power Supply
- Adapter for ADSL
- AC/DC Adaptors/Chargers for Cordless Phone