FSQ110
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 17W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | FSQ110 |
| Number of Outputs | 1 |
| Output Voltage | 650V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Power Dissipation | 1.4W |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | 8V~20V |
| Max Supply Current | 5mA |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Max Output Power | 12W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 65 % |
| Duty Cycle | 60% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Breakdown Voltage | 650V |
| Height | 3.3mm |
| Length | 10.15mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FSQ110 Overview
In the 8-DIP (0.300, 7.62mm) package, the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.The AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -25°C~85°C TA .Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.As a result, the switching frequency reaches 100kHz .Within the range of 8V~20V supply voltage (Vcc/Vdd), it can be used.There have been 8 terminations of this program.On the ac/dc converter, there are 8 pins.It are possible to mount thare ac dc converters by Through Hole .It belongs to a manufacturer family of FPS? .A similar acdc converter can be searched by using the FSQ110 family.Running 1 outputs is available.There are a ac to dc conversions included in Switching Regulator or Controllers .AC to DC converter is set to 600mA for the output current.This AC/DC converter produces a voltage of 650V as its output.There is a maximum supply current of 5mA that AC to DC converter can handle.Using the AC to DC power converter with 12W maximum output power is possible.
FSQ110 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 100kHz
With 8 pins
Output Current at 600mA
FSQ110 Applications
There are a lot of ON Semiconductor FSQ110 AC DC Converters applications.
- Portable Apparatus
- Appliance Power Supplies
- Set Top Boxes (STB)
- Air conditioners
- Off--line Battery Charger
- Wall switches
- Adapters for Handheld Electronics
- MPS parts
- AC--DC Adapter
- Replaces linear transformers