FSQ0270RNA
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 851mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 24W |
| Max Power Dissipation | 24W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Base Part Number | FSQ0270 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Power Dissipation | 1.5W |
| Output Current | 790mA |
| Voltage - Supply (Vcc/Vdd) | 8V~20V |
| Max Supply Current | 5mA |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Fall Time (Typ) | 25 ns |
| Switcher Configuration | SINGLE |
| Max Output Power | 16W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 65 % |
| Duty Cycle | 60% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Breakdown Voltage | 700V |
| Height | 3.4mm |
| Length | 9.2mm |
| Width | 6.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
FSQ0270RNA Overview
In the package 8-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.There is a AC/DC converter mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -25°C~85°C TA in order to ensure its performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.This AC/DC converter is designed for use within the range of 8V~20V supply voltage (Vcc/Vdd).There are a total of 8 terminations.In this ac/dc converter, there are 8 pins.It is suitable for mounting by Through Hole .It belongs to the manufacturer family of FPS? .If you select the FSQ0270 family, you will be able to search for similar acdc converters.In this AC to DC transformer, there are 1 outputs to run.There are a ac to dc conversions included in Switching Regulator or Controllers .The output current is set to 790mA .Its output voltage is700V .When operating at a frequency of 100kHz , AC to DC converter is capable of reaching high efficiency.Here is the standard for REACH SVHC : No SVHC .The AC to DC converter input voltage can be powered under 265V .The AC to DC inverter can be used with an input voltage of less than 85V V.Interfacing ICs conduct when there is 20V supply voltage.A maximum supply current of 5mA can be handled by this power AC DC.An input voltage (AC) should be applied under 265V to the AC to DC power converter.Using the AC to DC power converter with 16W maximum output power is possible.
FSQ0270RNA Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 790mA
Operating Supply Voltage at the range of 20V
FSQ0270RNA Applications
There are a lot of ON Semiconductor FSQ0270RNA AC DC Converters applications.
- Appliance Power Supplies
- Battery chargers for cordless
- Industrial controls
- Appliances
- ATX/BTX Auxiliary Power
- White goods
- Replaces linear transformers
- Laptops
- Power Adaptors
- Power adapters for monitors