FSL306LRN
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 501.2mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 3W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | FSL306 |
| Number of Outputs | 1 |
| Output Voltage | 265V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 800μA |
| Current | 450mA |
| Output Current | 450mA |
| Voltage - Supply (Vcc/Vdd) | 7V~26V |
| Max Supply Current | 350μA |
| Output Power | 7W |
| Topology | Buck, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 7.6ns |
| Fall Time (Typ) | 26.1 ns |
| Switcher Configuration | BUCK-BOOST |
| Max Output Power | 7W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 77 % |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 8V |
| Min Breakdown Voltage | 650V |
| Height | 3.42mm |
| Length | 9.77mm |
| Width | 6.47mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSL306LRN Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm), 7 Leads package.There is a AC/DC power converter of Tube available.It is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ °C in order to achieve its full performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.As soon as the switching frequency reaches 50kHz , the circuit is closed.This AC/DC converter is designed for use within the range of 7V~26V supply voltage (Vcc/Vdd).It has a total of 7 terminations.Approximately 7 pins are present on the ac/dc converter.Surface Mount are the recommended mounting method for the ac dc converters.If you select the FSL306 family, you will be able to search for similar acdc converters.There are 1 outputs to run.AC to DC converter is included in Switching Regulator or Controllers .450mA is set as the output current.There is 265V output voltage from this AC/DC converter.It is assumed that a coverter generates 7W as its output power.AC to DC converter can handle a maximum supply current of 350μA .Using the AC to DC power converter with the maximum output power of 7W is possible.
FSL306LRN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 50kHz
With 7 pins
Output Current at 450mA
FSL306LRN Applications
There are a lot of ON Semiconductor FSL306LRN AC DC Converters applications.
- AC-DC Output Power Conversion Applications
- AC/DC Adaptors/Chargers for Cell Phones
- Wireless System
- Battery chargers for mobile devices with touchpad display
- Humidifier
- Open Frame Switching Power Supply
- Standby and Auxiliary Power Supplies
- Adapter/Charger for Cell
- Replaces linear transformers
- Utility meters