FSL206MRN
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930mg |
| Manufacturer Package Identifier | DIP762W46P254L941H508Q8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 19Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 12W |
| Max Power Dissipation | 1.3W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | FSL206 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 10V |
| Voltage | 26V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 300μA |
| Current | 660mA |
| Power Dissipation | 1.3W |
| Voltage - Supply (Vcc/Vdd) | 7V~26V |
| Max Supply Current | 1.3mA |
| Turn On Delay Time | 6.1 ns |
| Topology | Flyback |
| Min Input Voltage | 26V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 67kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 26V |
| Turn-Off Delay Time | 43.6 ns |
| Switcher Configuration | SINGLE |
| Max Output Power | 7W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 78 % |
| Duty Cycle | 72% |
| Output Isolation | Isolated |
| Voltage - Start Up | 8V |
| Min Breakdown Voltage | 650V |
| Height | 3.683mm |
| Length | 9.83mm |
| Width | 6.67mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
FSL206MRN Overview
In the package 8-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.It is available in Tube AC/DC power converter.This AC/DC converter is mounted in the way of Through Hole .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.The switching frequency reaches 67kHz .This AC/DC converter is suitable for operation in the range of 7V~26V supply voltage (Vcc/Vdd).There are a total of 8 terminations.On this ac/dc converter, there are 8 pins.The ac dc converters are suitable for mounting by Through Hole .This AC to DC converter belongs to the FPS? manufacturer family.If you select the FSL206 family, you will be able to search for similar acdc converters.A total of 1 outputs are available for processing.Switching Regulator or Controllers includes the ac to dc conversions.You are able to read the REACH SVHC standard at: No SVHC .An input voltage of less than 26V V is required to operate the AC to DC inverter.There is a maximum current limAC to DC converter of 1.3mA for the supply.It can be determined that the resistance of this power AC DC is 19Ohm .The AC to DC power converter is capable of operating at a maximum output power of 7W .
FSL206MRN Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 67kHz
With 8 pins
Resistance : 19Ohm
FSL206MRN Applications
There are a lot of ON Semiconductor FSL206MRN AC DC Converters applications.
- Standby power supplies for TV
- Laptops and personal digital assistants
- AC/DC LED Driver applications
- Low power ac?dc Adapters for Chargers
- AC?DC USB chargers for Cameras
- Set Top Boxes (STB)
- Replaces linear transformers
- Appliance Power Supplies
- AC/DC Adaptors/Chargers for E-books
- Power Adaptors