FSFR2100U

FSFR2100U

11.3V~25V 9 Pin FSFR2100 AC to DC power converterFSFR Series 1 OutputsUp to 300kHz


  • Manufacturer: ON Semiconductor
  • Origchip NO: 598-FSFR2100U
  • Package: 10-SIP Module, 9 Leads, Formed Leads
  • Datasheet: -
  • Stock: 321
  • Description: 11.3V~25V 9 Pin FSFR2100 AC to DC power converterFSFR Series 1 OutputsUp to 300kHz (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 10-SIP Module, 9 Leads, Formed Leads
Number of Pins 9
Operating Temperature -40°C~130°C TJ
Packaging Tube
Series FSFR
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 380mOhm
Max Power Dissipation 400W
Base Part Number FSFR2100
Number of Outputs 1
Output Voltage 24V
Nominal Supply Current 7mA
Power Dissipation 12W
Output Current 8A
Voltage - Supply (Vcc/Vdd) 11.3V~25V
Max Supply Current 9mA
Output Power 192W
Control Features EN, Frequency Control
Topology Half-Bridge
Frequency - Switching Up to 300kHz
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Over Voltage
Duty Cycle 50%
Output Isolation Isolated
Voltage - Breakdown 500V
Voltage - Start Up 14.5V
RoHS Status RoHS Compliant

FSFR2100U Overview


It is embedded in package 10-SIP Module, 9 Leads, Formed Leads .In Tube AC/DC power converter, it is available.There is a mounting point for this AC/DC converter in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~130°C TJ °C.Up to 300kHz is the switching frequency.Within the range of 11.3V~25V supply voltage (Vcc/Vdd), it can be used.There are 9 pins on the ac/dc converter.It are possible to mount thare ac dc converters by Through Hole .It is a member of FSFR manufacturer family.If you select the FSFR2100 family, you will be able to search for similar acdc converters.There are 1 outputs to run.In this AC to DC transformer, the output current is set to 8A .There is 24V output voltage from this AC/DC converter.In the AC to DC transformer of a coverter, the output power generated is 192W .There is a maximum current limAC to DC converter of 9mA for the supply.It can be determined that this power AC DC has a resistance of 380mOhm .

FSFR2100U Features


Packaged with 10-SIP Module, 9 Leads, Formed Leads
Switching Frequency at Up to 300kHz
With 9 pins
Output Current at 8A
Resistance : 380mOhm

FSFR2100U Applications


There are a lot of ON Semiconductor FSFR2100U AC DC Converters applications.

  • Standby and Auxiliary Power Supplies Set Top Boxes (STB)
  • AC?DC USB chargers for Cameras
  • Low-Voltage I/O System Power
  • Battery Chargers
  • MP3
  • Open Frame Switching Power Supply
  • Lighting controls
  • Standby Power for General Off-Line Applications
  • Battery chargers for mobile devices with touchpad display
  • Battery Chargers

Write a review

Note: HTML is not translated!
    Bad           Good