FSFA2100
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 10-SIP Module, 9 Leads, Formed Leads |
| Number of Pins | 9 |
| Weight | 3.708632g |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | FPS™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Resistance | 380mOhm |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 450W |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 200W |
| Max Power Dissipation | 12W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Current Rating | 11mA |
| Base Part Number | FSFA2100 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 14.5V |
| Input Voltage-Nom | 17V |
| Voltage | 400V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 7mA |
| Power Dissipation | 12W |
| Output Current | 8A |
| Voltage - Supply (Vcc/Vdd) | 11.3V~25V |
| Max Supply Current | 9mA |
| Control Features | Frequency Control |
| Topology | Half-Bridge |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 25V |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 600V |
| Height | 3.4mm |
| Length | 26.2mm |
| Width | 10.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSFA2100 Overview
This ac to dc converter is embedded in package 10-SIP Module, 9 Leads, Formed Leads .Tube case is available for the ac dc converter.It is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~130°C TJ °C so that it can deliver its performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.In this AC to DC transformer, the switching frequency is 100kHz .Supply voltage (Vcc/Vdd) does not need to exceed 11.3V~25V .In total, there are 9 terminations.The ac/dc converter has 9 pins.There are no problem mounting the ac dc converters by Through Hole .It is a member of FPS? manufacturer family.If you select the FSFA2100 family, you will be able to search similar acdc converters.There are 1 outputs to be run.The ac to dc conversions can be found in Switching Regulator or Controllers .There is 8A output current set.You are able to read the REACH SVHC standard at: No SVHC .Interface ICs conduct when the supply voltage is 14.5V .The maximum supply current AC to DC converter can handle is 9mA .The resistance of this power AC DC is 380mOhm .
FSFA2100 Features
Packaged with 10-SIP Module, 9 Leads, Formed Leads
Switching Frequency at 100kHz
With 9 pins
Output Current at 8A
Operating Supply Voltage at the range of 14.5V
Resistance : 380mOhm
FSFA2100 Applications
There are a lot of ON Semiconductor FSFA2100 AC DC Converters applications.
- Wall switches
- Networking
- Handheld/Battery-Powered Systems
- Set-top boxes
- Universal input AC/DC adapters (15W - 45W)
- AC-DC Output Power Conversion Applications
- Z-Wave
- AC--DC Adapter
- AC/DC Adaptors/Chargers for Cell Phones
- Power Adaptors