FS7140-02G-XTD

FS7140-02G-XTD Overview

Clock ICs are packaged using the Tube method. Clock PLL is embedded in the 16-SSOP (0.209, 5.30mm Width) package. As you can see, it consists of 16 terminations. Clock generator ics require a voltage of 3.3V. This clock generator receives its inputs from Crystal, which is designed to be the clock source. It provides a maximum frequency of 400MHz. PLL clock is mounted in the way of Surface Mount. This clock PLL works with a supply voltage of 3V~3.6V. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. It's compatible with CMOS, PECL logic levels. An electrical part such as this one can be classified as a PLL Clock Generator component. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. These related electrical parts are available for the base part number FS7140. A 16 pin is available on the PLL. There is a maximum supply voltage of 3.3V that clock generator can handle. Clock generator can also be included into Clock Generators. The output frequency can be magnified as high as possible with the assistance of 1 signal outputs. By operating at a frequency of 35MHz, RF synthesizer is able to reali35MHze high efficiency. A supply current of 35mA needs to be provided to fully play RF synthesizer's function. This frequency synthesizer operates at a maximum current of 35mA.

FS7140-02G-XTD Features

Available in the 16-SSOP (0.209, 5.30mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

FS7140-02G-XTD Applications

There are a lot of ON Semiconductor FS7140-02G-XTD Clock Generators applications.

• High-speed communication applications
• Set-top boxes
• PMR (Professional Mobile Radio)
• High-frequency induction heating
• Skew suppression
• Frequency synthesis
• 10 Gigabit Ethernet
• Motor speed controls
• Pagers
• Symbol synchronization