FS6377-01G-XTD
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | PLL Clock Generator |
| Terminal Finish | Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Frequency | 27MHz |
| Base Part Number | FS6377 |
| Output | CMOS |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Number of Elements | 3 |
| Interface | I2C |
| Number of Circuits | 1 |
| Operating Supply Current | 43mA |
| Nominal Supply Current | 43mA |
| Max Supply Current | 43mA |
| Frequency (Max) | 230MHz |
| Halogen Free | Halogen Free |
| Input | Crystal |
| Ratio - Input:Output | 1:4 |
| Primary Clock/Crystal Frequency-Nom | 27MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Height | 1.55mm |
| Length | 9.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FS6377-01G-XTD Overview
As a clock IC, PLLs is packaged using the Tube method. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. 16 terminations can be found in frequency generators. Clock generator ics require a voltage of 5V. It is designed that the Clock PLL's input should be Crystal. 1 circuits are implemented to access the electronic component's full performance. The frequency generator has a maximum frequency of 230MHz. This component can be conveniently installed on the panel thanks to the Surface Mount. There should be 3V~5.5V provided with this RF synthesizer. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. CMOS is designed for clock generator's output. This electronic component can be classified as a PLL Clock Generator. The clock-generating IC is a 16-bit device designed specifically for microprocessors. These related electrical parts are available for the base part number FS6377. There are a number of 16 pins that are available on the frequency synthesizers. The maximum supply voltage that clock generator can handle is 5V. Clock Generators-type frequency generators are usually classified as this type. 4 signal outputs are provided for enhancing output frequency as much as possible. At a frequency of 27MHz, the system can achieve high efficiency. The supply current of 43mA needs to be provided to fully play clock generator's function. The clock PLL here has 3 elements and has a very low jitter performance. This clock generator operation can supply up to 43mA of current.
FS6377-01G-XTD Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 5V
Operating supply voltage of 5V
FS6377-01G-XTD Applications
There are a lot of ON Semiconductor FS6377-01G-XTD Clock Generators applications.
- Cell phones
- 1 Gigabit Ethernet
- FSK demodulators
- Broadcast communication
- FM demodulation networks for FM operations
- CB radios
- Laptops
- Bit synchronization
- Satellite receivers
- Carrier synchronization in wired communication