FPF1108
| Parameters | |
|---|---|
| Factory Lead Time | 17 Weeks |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Weight | 42mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF1108 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Voltage | 4V |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Current | 1.2A |
| Output Configuration | High Side |
| Power Dissipation | 1W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 215 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 4V |
| Turn-Off Delay Time | 3.9 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~4V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 35m Ω |
| Height | 332μm |
| Length | 960μm |
| Width | 960μm |
| RoHS Status | ROHS3 Compliant |
FPF1108 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a package for it in the 4-UFBGA, WLCSP package.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.There are 1 outputs available on this lighting driver.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts can be obtained with this LED driver.It is equipped with Load Discharge, Slew Rate Controlled features.It comes under the family of FPF1108.A total of 4 terminations have been recorded.The operation is carried out using the 4 pins.Maximum output current falls to 1.2A when operation criteria are met.The LED driving board is mounted in the way of Surface Mount.It has a resistance of 150mOhm.There is an electrical component included in the IntelliMAX? series.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.This LED driver can handle voltages up to 4V volts.There is a minimum input voltage of 1.2V volts.
FPF1108 Features
Resistance of 150mOhm
FPF1108 Applications
There are a lot of ON Semiconductor FPF1108 Power Switches ICs applications.
- Various applications equipped with buttons
- Low Voltage I/O System Power
- Wireless/Networking Cards
- Handheld Devices
- HDD, SSD
- Hot Swap
- Mobile Communication Devices
- Solid-State Drives
- Gaming
- Wireless Headsets