FDMF3030
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-PowerTFQFN |
| Number of Pins | 40 |
| Weight | 193.06667mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | PowerTrench®, SyncFET™ |
| JESD-609 Code | e3 |
| Feature | Bootstrap Circuit, Diode Emulation, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | Synchronous Buck Converters |
| Subcategory | Switching Regulator or Controllers |
| Technology | DrMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FDMF3030 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 50A |
| Interface | PWM |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 2mA |
| Output Configuration | Half Bridge |
| Output Current | 50A |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 50A |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Voltage - Load | 3V~24V |
| Fault Protection | Over Temperature, Shoot-Through, UVLO |
| Number of Drivers | 2 |
| Rds On (Typ) | 900m Ω LS, 800m Ω HS |
| Load Type | Inductive |
| Height | 1.1mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
FDMF3030 Overview
For packaging, it is used with Tape & Reel (TR).A cost-saving measure, H bridge is included in 40-PowerTFQFN.Reliabilbridge drivery can be improved by increasing 4.5V~5.5V's supply voltage.In Surface Mount, H bridge circuit is mounted.Motor driver H bridge is possible for -40°C~150°C TJ to operate normally at motor driver H bridges operating temperature.Among H bridge motor drivers many uses, H bridge motor driver can be found in Synchronous Buck Converters as well.H gate is mounted on the PCB using Surface Mount.In addH gateion to Bootstrap Circuit, Diode Emulation, Status Flag, H gate has the following specific characteristics.40 terminations are used to terminate transmission lines with H bridges that match their characteristic impedances.An interface using 40 pins is used to provide pronged contact.This H bridge ic has a base H bridge ic number of FDMF3030 which allows more related H bridge ics to be identified.H bridge circuit contains an analog IC type SWITCHING REGULATOR.Basically, it is an electronic H-bridge that belongs to the PowerTrench?, SyncFET? series.A power source can supply a maximum load current of 50A when the ambient temperature is specified.Through the output and power supply pins, a current of 50A is flowing.The Hbridge has 1 outputs.This H bridge motor driver belongs to the subcategory of Switching Regulator or Controllers and shares several similarities with other parts in that category.Integrated 2 drivers are available.
FDMF3030 Features
Available in 40-PowerTFQFN Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : FDMF3030
FDMF3030 Applications
There are a lot of ON Semiconductor FDMF3030 Full Bridge Drivers, Half-Bridge Drivers applications.
- High current, low profile DC-DC converters
- Small Form-Factor Voltage Regulator Modules
- V-Core
- Home Appliances
- Industrial Automation
- Quad DC motor
- Audio-visual equipment
- OA equipments
- DVD players
- High-Performance Gaming Motherboards