FAN7530N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 496mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Voltage - Supply | 12V~22V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Base Part Number | FAN7530 |
| Operating Supply Voltage | 22V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 9.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Mode | Critical Conduction (CRM), Discontinuous (Transition) |
| Current - Startup | 40μA |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FAN7530N Overview
In a 8-DIP (0.300, 7.62mm) package, it is available.A Tube-packaging method was used to package it.Depending on the device, the mounting type will either be Through Hole or C.It should be powered by 12V~22V's voltage supply.There is a setting on the device to operate at -40°C~125°C.POWER FACTOR CONTROLLER is another IC type on the part.An array of 8 terminals is located on the gadget.Startup current is 40μA.Pin number 8 remains unchanged.One of the device's best parts is that it has a number of FAN7530 on it.With a minimum input voltage of 9.5V, it is capable of functioning.There is a mountain on the other side of it called Mount Through Hole.
FAN7530N Features
FAN7530N Applications
There are a lot of ON Semiconductor FAN7530N PFC PMICs applications.
- Electronic notebook
- Analog datalogger
- Car window lift
- Vibration sensor
- Engine cooling fan
- Bypass circuit
- Pressure sensor
- Telematics
- Car infotainment
- Low-voltage microprocessor power supplies