FAN5308MPX
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 156mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Additional Feature | ALSO OPERATES IN PFM MODE |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | FAN5308 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Max Output Current | 800mA |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 5.5V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.3kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FAN5308MPX Overview
As a result of the use of the Tape & Reel (TR) package, the performance of this voltage regulator is optimized. There are 6 terminations in this voltage regulator. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. Space savings are achieved by placing this voltage regulator in the 6-WDFN Exposed Pad package. 1 outputs have been configured in the voltage regulator 12v. On its output pins, this adjusting voltage regulator generates Adjustable output. A Surface Mount mounting is required for this switching regulator. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. The switching frequency of this DC-DC switching regulator reaches 1.3kHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 2.5V. The output voltage of this voltage regulator (Min/Fixed) amounts to 0.8V volts. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. There is a DC/DC regulator in this family that belongs to the FAN5308 family. The adjusting voltage regulator's output voltage is maintain at 5.5V. In order to operate voltage regulator, there are 6 pins that must be connected. There should be at least a 800mV volt output voltage for this switching regulator in order to make it work properly. Switching regulator has a maximum output current of 800mA A, which is sufficient to meet the requirements of operation. DC DC switching regulator offers a maximum output voltage of 5.5V as its maximum output voltage. With 5.5V as the supply voltage, this DC-DC switching regulator will operate. This harley voltage regulator is more efficient and stable due to its ALSO OPERATES IN PFM MODE feature.
FAN5308MPX Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
Operating supply voltage of 5.5V
ALSO OPERATES IN PFM MODE
FAN5308MPX Applications
There are a lot of ON Semiconductor FAN5308MPX Voltage Regulators applications.
- Direct power supply system
- CMM
- Thermal power
- Emergency lighting monitoring equipment
- Television equipment
- Medical equipment
- Medical monitoring systems
- Combined machine tools
- Post equipment
- Low output voltage switching power supply circuits